

可燃气体传感器TGS813
一、可燃气体传感器TGS813主要参数:电路电压:24V(AC/DC)测量范围:500-10,000ppm 灵敏度(电阻比):0.55-0.65 加热器电压:5V±0.2V(AC/DC) 二、可燃气体传感器TGS813主要特点:后期电路简单;长寿命,低功耗;对甲烷、乙烷、丙烷等可燃气体的高敏感度; 深圳新世联科技有限公司主营产品:各种传感器、变送器、仪表;温湿度传感器;气体传感器、变送器;温湿度变送器;压力传感器、变送器;霍尔传感器;光纤全系列传感器;电流传感器;光电开关;光谱仪;
Applications: Features: TGS 813 - for the detection of Combustible Gases The figure below represents typical sensitivity characteristics, all data having been gathered at standard test conditions (see reverse side of this sheet). The Y-axis is indicated as sensor resistance ratio (Rs/Ro) which is defined as follows: Rs = Sensor resistance of displayed gases at various concentrations Ro = Sensor resistance in 1000ppm methane The figure below represents typical temperature and humidity dependency characteristics. Again, the Y-axis is indicated as sensor resistance ratio (Rs/Ro), defined as follows: Rs = Sensor resistance at 1000ppm of methane at various temperatures/humidities Ro = Sensor resistance at 1000ppm of methane at 20°C and 65% R.H. * Domestic gas leak detectors and alarms * Portable gas detectors The sensing element of Figaro gas sensors is a tin dioxide (SnO2) semiconductor which has low conductivity in clean air. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air. A simple electrical circuit can convert the change in conductivity to an output signal which corresponds to the gas concentration. The TGS 813 has high sensitivity to methane, propane, and butane, making it ideal for natural gas and LPG monitoring. The sensor can detect a wide range of gases, making it an excellent, low cost sensor for a wide variety of applications. Also available with a ceramic base which is highly resistant to severe environments up to 200°C (model# TGS 816). * General purpose sensor with sensitivity to a wide range of combustible gases * High sensitivity to methane, propane, and butane * Long life and low cost * Uses simple electrical circuit |