HOME Products Solutions Applications | About Us | News | Service | Contact Us
| Hot Products | ICs Products | Passive Products
 
    Product Description
 | ICs >> CML >> CMX868P4
Product Picture  
Part No.  CMX868P4
Brand  CML
Quantity  8000
Package  DIP
Description  NEW ORIGIANL PB-FREE
Product Profile£º

CMX868

Low Power V.22bis Modem

Resources:   datasheet  - data updates  -  innovations   -  application notes  -  FAQs  -   evaluation  -
Features
  • V.22bis Compatible Modem
  • V.22 and Bell 212A 1200/1200 b/s
  • V.23 1200/75, 1200/1200, 75, 1200 b/s
  • Bell 202 1200/150, 1200/1200, 150, 1200 b/s
  • V.21/Bell 103 300/300 b/s
  • Software Adjustable Rx and Tx Levels
  • Low Power (2.7V) Requirement
  • Simple Serial Control Interface
  • Answer/Originate Tone Detector and Generator
  • Call Progress Tone Detector
  • Integrated DTMF Encoder and Decoder
  • Line Reversal, Ring Detector and Off-Hook Relay Driver
  • On-Chip Line Hybrid
  • DE8681 DemoKit Available
  • DAA Reference Design Available
Applications
  • Telephone Telemetry Systems
  • Remote Utility Meter Reading
  • Security Systems
  • Payphones
  • Cable System TV Set-Top Boxes
  • Industrial Control Systems
  • Electronic Cash Terminals
  • Vending Machines

Package Styles:
- CMX868D2  - CMX868E2  - CMX868P4

Supply Requirement:
2.7V power supply

Description
This V.22bis modem is ideal for use in any telephone based information and telemetry system. Using V.22bis signalling fast call set up times and robust error resistant transmission can be implemented by efficient low power circuits.
The device uses low geometry CMOS techniques to provide multi-mode operation with very low power requirements. The circuit can operate with full duplex operation at 2400/1200/300 b/s over 2 or 4 wire circuits.
Control of the device is via a simple high speed synchronous serial bus. This allows easy interfacing to a host µController.
The data to be transmitted and received by the modem is also downloaded over the same high speed serial bus. This ensures a very efficient hardware implementation in systems with a host µController. A V.22bis/V.22 compatible data randomiser and UART function is included in the device.
The integrated DTMF encoder/decoder can be used as part of the dial out function to enable the host µController to set-up a data call easily. All 16 DTMF tone combinations are available along with encoder of a single tone ¡®melody¡¯ mode.
A high current drive output is provided to drive an external ¡®off hook¡¯ relay. To allow simple line interfacing the device includes an on chip line hybrid driver.
The ¡®answer¡¯, ¡®originate¡¯ generators/detectors and call progress tone detectors included on the device make the set-up of the telephone call a simple matter for the host µController.
In many data collection and telemetry systems power consumption is of critical importance. The device features a ¡®Zero Power¡¯ standby mode. In this mode current consumption is typically 1µA. While in standby the device may be automatically activated by a ringing voltage or line voltage reversal input to the Ring/Line reversal detector.
Once operating the device requires a minimum supply voltage of 2.7V and consumes 7mA typically. The very low power requirement of the device makes it ideally suited to applications which draw their power supply from the telephone line itself. On exiting from the ¡®Zero power¡¯ standby mode the device will generate an interrupt signal. This can be used to wake the host µController allowing it to service the incoming data call.
 

 

 

 
 
 

 

 

Browse Count£º1100  Issuance Time£º2007/5/9 ¡¾print¡¿ ¡¾Back¡¿ 
HOME | About us | Products | Solutions | Technology Info | News | Enquiry | Contact Us | Website Manage
Addess: Room 4C038,4/F,Sun Asia Electronics Plaza,Zhonghang Road,Futian District, Shenzhen
Tel£º+86-755-82579579; 61306558; 61306958; 61306257; 61306513; 82812265; 82579639
Fax£º+86-755-61306957; E-mail£ºSales@khsdz.cn
ÔÁICP±¸08032164ºÅ Copyright © 2009 Faithrise (HK) Co. Limited. All rights reserved.