HOME Products Solutions Applications | About Us | News | Service | Contact Us
| Hot Products | ICs Products | Passive Products
 
    Product Description
 | ICs >> CML >> CMX869BE2
Product Picture  
Part No.  CMX869BE2
Brand  CML
Quantity  10000
Package  SMD
Description  NEW ORIGIANL PB-FREE
Product Profile£º

CMX869B

Low Power V.32 bis Modem

Resources:   datasheet |  data updates  |  application notes  |  faqs  |  innovations  |  demonstration  |
Quantity Price Guide: $4.49
 
Features
  • V.32 bis/ V.32/ V.22 bis/ V.22 Automodem
    (14400, 12000, 9600, 7200, 4800, 2400, 1200 bps Duplex)
  • V.22 bis/ V.22 Manual Modem (2400, 1200 bps)
  • V.23 (1200/ 75, 1200/ 1200, 75, 1200 bps FSK)
  • Bell 202 (1200/ 150, 1200/1200, 150, 1200 bps FSK)
  • V.21 or Bell 103 (300/ 300 bps FSK)
  • High Performance DTMF Modem
  • Single/Dual Tones Transmit and Receive
  • 'Powersave' Standby Mode
  • Asynchronous, Synchronous and HDLC Modes
Applications
  • EPOS Terminals
  • Telephone Telemetry Systems
  • Remote Utility Meter Reading
  • Security Systems
  • Industrial Control Systems
  • Electronic Cash Terminals
  • Pay-Phones
  • Cable TV Set-Top Boxes
Package Styles:
- CMX869BD2  - CMX869BE2 

Supply Requirement:
3.0V to 3.6V power supply

Description

The CMX869B is a multi-standard modem for use in EPOS terminals and telephone based information and telemetry systems. This highly integrated single-chip modem IC provides the functions needed to construct a ITU V.32 bis automode modem or a V.22 bis, V.22, V.21 and Bell 202, Bell 103 compatible modem operating under the control of external host timing for EPOS and other proprietary protocols.

The V.32 bis automode-modem provides operation from 14400 bps with automatic fallback through to 4800 bps, retrain, rate re-negotiation and automatic detection of V.22 and V.22 bis modems.

A high-quality DTMF decoder with excellent immunity to falsing on voice and a standard DTMF encoder are included. Alternatively, the device can transmit and detect user-programmed single and dual-tone signals, call progress signals or modem calling and answering tones.

The CMX869B features a software controlled output to drive a hook switch relay and a ring detector block that continues to function when the device is in Powersave mode. When a line voltage reversal or ringing signal is detected, the ring detector circuit provides an interrupt that can wake up the host µController.

Line input and line outputs can be single-ended or differential and the line-output amplifier is capable of directly driving into a low-impedance transformer or opto-isolated DAA. The hybrid and gain control circuits are integrated on chip, requiring only passive external components to build a 2- or 4-wire line interface.

Host control and data transfer is via a simple, high-speed serial bus that operates in normal and Powersave modes and which is compatible with popular µC serial interfaces. An embedded USART accepts multi-format asynchronous data with V.14 support, or allows unformatted synchronous data or HDLC framed data to be received or transmitted. Data transfer can be in either an 8- or 16-bit format.

The CMX869B operates from a single 3.3V supply over a temperature range of -40¡ãC to +85¡ãC and is available in 24-pin TSSOP (E2) and SOIC (D2) packages.

Browse Count£º1814  Issuance Time£º2007/5/9 ¡¾print¡¿ ¡¾Back¡¿ 
HOME | About us | Products | Solutions | Technology Info | News | Enquiry | Contact Us | Website Manage
Addess: Room 4C038,4/F,Sun Asia Electronics Plaza,Zhonghang Road,Futian District, Shenzhen
Tel£º+86-755-82579579; 61306558; 61306958; 61306257; 61306513; 82812265; 82579639
Fax£º+86-755-61306957; E-mail£ºSales@khsdz.cn
ÔÁICP±¸08032164ºÅ Copyright © 2009 Faithrise (HK) Co. Limited. All rights reserved.