HOME Products Solutions Applications | About Us | News | Service | Contact Us
| Hot Products | ICs Products | Passive Products
 
    Product Description
 | ICs >> CML >> FX806ALG
Product Picture  
Part No.  FX806ALG
Brand  CML
Quantity  9500
Package  SMD
Description  across-the-aboard SALE CML ROHS IN STOCK
Product Profile£º

FX806

Audio Processor

Resources:   datasheet  -
Features
Full Duplex Audio Signaling Processor
Single Tone, Selective Call Systems
Tone Decoder with programmable NOTONE timer
Two Individual tone encoders and a programmable Tx Period Timer
Low Power CMOS Device, On-Chip programmable amplifier
C-BUS Compatible
 
 
Description
The FX806 is a PMR Audio Processor intended primarily to operate as the 'Audio Terminal' of Radio Systems using the DBS 800 Digitally- Integrated Baseband System.
The FX806 is a half-duplex device whose signal paths and level setting elements are configured and adjusted by digital information sent from the Radio Controller using 'C-BUS' hardware and software protocol.
The signal path of the FX806 can be viewed as 3 sections:
Input Process
Selectable transmit or receive input paths. Transmit voice signals pass through microphone pre-amplifier, voltage controlled gain (VOGAD) anf highpass filter stages. Received audio is de-emphasised.
This initial audio, after in-line gain adjustment, is available for switching to either external audio processes (such as scrambling) or internally to the Main Process stages.
Main Process
Conditioning for input or External Process signals with pre-emphasis, high and lowpass switched capacitor filters and a transmitter deviation limiter.
Summation and Output Drives
Main 'voice audio' for transmission is combined with signaling and data from other DBS 800 microcircuits, to provide the composite (in and outband) signal for the digitally adjustable Transmitter Modulation Drives.
Received audio is level (volume) adjusted to output to loudspeaker circuitry.
Signal-level stability and therefore output accuracy, of the FX806 is maintained by a voltage- controlled gain system using selectable signal-level detectors.
Signal levels can be dynamically controlled to provide 'dynamic-compensation' for such factors as temperature drift, VCO non-linearity, etc.
FX806 audio output stages can be completely disabled or the whole microcircuit placed into a 'Powersave' mode, leaving only clock and C-BUS circuitry active.
The FX806 is a low-power, 5-volt CMOS integrated circuit and is available in 24-pin DIL cerdip and 24-pin/ lead plastic SMD packages.
 

Applications
Signaling Systems supported
SelCall (CCIR, EEA, ZVEI I / II /III) 2-Tone SelCall DTMF Encode
Inband Tone Signaling capability for LMR and other Radio Systems

Package Styles:
- FX806J  - FX806LG  - FX806LS
Supply Requirement:
4.5V to 5.5V power supply
 
 
 

Browse Count£º1043  Issuance Time£º2006/10/24 ¡¾print¡¿ ¡¾Back¡¿ 
HOME | About us | Products | Solutions | Technology Info | News | Enquiry | Contact Us | Website Manage
Addess: Room 4C038,4/F,Sun Asia Electronics Plaza,Zhonghang Road,Futian District, Shenzhen
Tel£º+86-755-82579579; 61306558; 61306958; 61306257; 61306513; 82812265; 82579639
Fax£º+86-755-61306957; E-mail£ºSales@khsdz.cn
ÔÁICP±¸08032164ºÅ Copyright © 2009 Faithrise (HK) Co. Limited. All rights reserved.