|
Features Selectable Data Rates: 1200/2400/4800 Baud Full Duplex FFSK Rx and Tx Bandpass Filters Clock Recovery and Carrier Detect Facilities Pin Selectable Xtal/Clock Inputs: 1008MHz or 4.032MHz Simple Control: No Processor Required |
Applications Data-Over-Radio PMR and Cellular Radio Signalling Automatic Vehicle Location (Differential GPS) Links Portable Data Terminals Personal/ Cordless Telephone Industrial Control Signalling
Package Styles
- CMX469AD3 - CMX469AE2 - CMX469AP6
Supply Requirement
2.7V power supply |
|
Description The CMX469A is a single-chip CMOS LSI circuit which operates as a full-duplex pin-selectable 1200, 2400 or 4800 baud FFSK Modem. The mark and space frequencies are 1200/1800, 1200/2400 and 2400/4800Hz respectively. Tone frequencies are phase continuous; transitions occur at the zero crossing point. Employing a common Xtal oscillator with a choice of two clock frequencies (1.008MHz or 4.032MHz) to provide baud-rate, transmit frequencies, and Rx and Tx synchronisation, the transmitter and receiver operate entirely independently including individual section powersave functions. The CMX469A includes on-chip circuitry for Carrier Detect and Rx Clock recovery, both of which are made available as output pins. Rx, Tx and Carrier Detect paths each contain a bandpass filter to ensure the provision of optimum signal conditions both in the modem and for the Tx modulation circuitry. The CMX469A demonstrates a high sensitivity and good bit-error-rate under adverse signal conditions; the carrier detect time constant is set by an external capacitor, whose £¦#118alue should be arranged as required to further enhance this product¡¯s performance in high noise environments. This low-power device requires few external components and is available in small outline plastic SOIC, TSSOP and DIL packages. |