网站主页 | 产品展示 技术方案 关于我们 | 新闻资讯 | 客户服务 | 人才招聘 | 联系我们
| 技术方案 | 技术资料
 
    技术方案
CMX910 AIS Baseband Processor IC

发布日期 [2007/5/9]    阅读 [1081] 次

CMX910 AIS Baseband Processor IC
Addressing Class-A and Class-B Marine AIS
May 2006

The NEW CMX910 gives global designers of Marine Automatic Identification Systems (AIS), a helping hand in their quest to develop low-cost Class-A and Rx only Class-B solutions, for both commercial and leisure maritime vessels, of all sizes.

The CMX910 is a highly integrated baseband signalling processor IC, providing all of the required baseband processing, control and data formatting/unformatting. This clever integration reduces component-count, which further reduces board size, enabling even the smallest of AIS units to be conceived, particularly useful for OEM integrated solutions.

Designed as an ultra-low-power IC (3.0V), many of the CMX910's on-chip functions can be powersaved when not actively required. This innovative feature allows inter-slot powersaving to the Rx and/or Tx channels when not required in the operating cycle. Half duplex in operation, the CMX910 comprises two I and Q Rx paths, and one Tx path, configurable for AIS or FSK (DSC) operation. 
The device performs channel filtering and signal modulation/demodulation, along with associated AIS functions such as training sequence detection, NRZI conversion and HDLC processing (flags, bit stuffing/de-stuffing, CRC generation/checking and slot-timing).

A 1200bps FSK demodulator interface provides a third parallel decode path (required by the AIS class A market.), using an external FSK modem. Integrated Rx/Tx data buffers and a slot/sample timer are also provided, all of which greatly reduces the processing requirements of the host micro-controller.
The thoughtful provision of a C-BUS controlled interface expansion port, device-enable ports and versatile auxiliary ADCs and DACs, further simplify system hardware design, reducing the overall end-equipment cost and size. 
Additionally, a supplementary FSK-only (FX/MX604) receiver can be supported via an external FSK demodulator interfaced to the CMX910. The CMX910 is capable of transmitting on either AIS channel (GMSK - 9,600bps) or FSK (1200bps) on the DSC channel, as required. 
The CMX910 meets International Maritime Authority IMO requirements (IMO-M1371) and IEC61933/IEC62287 standards, for inclusion in a Class-A or Class-B transponder. The CMX910 also supports the expanding Rx only leisure-craft market.

Ends.

 



 
【打印】 【返回】【顶部】【关闭】 
HOME | About us | Products | Solutions | Technology Info | News | Enquiry | Contact Us | Website Manage
地址:深圳市福田区华强北路新亚洲电子城4楼4C038室
电话:+86-755-82579579; 61306558; 61306958; 61306257; 61306513; 82812265; 82579639
传真:+86-755-61306957; 电子邮箱:Sales@khsdz.cn
粤ICP备08032164号 Copyright © 2008 KHS Electronics All rights reserved.