|
CMX869B V.32bis Modem IC |
|
A new addition to CML's family of high-speed modems |
July 2006
CML's new CMX869B V.32 bis Modem IC, sets the standard for component integration. Envisaged as a versatile modem for new-generation telemetry and wireline data systems, this single chip product provides all of the functions needed to construct an ITU V.32 bis automodem, or a V.32, V.22 bis, V.22, V.21 and Bell 202/Bell 103 compatible modem operating under the control of external host timing.
The CMX869B boasts a fully-integrated HDLC framer/de-framer also known as a PAD (Packet Assembler Disassembler), CRC block and HDLC/SDLC signalling - these tasks are essential to new generation EPOS systems, such as the expanding Chip-and-Pin terminals.
The CMX869B is the latest addition to CML's extensive portfolio of low-power telecom products and is a new addition to the CMX86x family of wireline modems.
The CMX869B operates from a single 3.3V supply and is available in 24-pin plastic SOIC and TSSOP packages. The guide price for this product is $4.20.
ENDS
|

| CMX869B |
Low Power V.32 bis Modem |
|
|
Quantity Price Guide: $4.49 |
Features
- V.32 bis/ V.32/ V.22 bis/ V.22 Automodem
(14400, 12000, 9600, 7200, 4800, 2400, 1200 bps Duplex)
- V.22 bis/ V.22 Manual Modem (2400, 1200 bps)
- V.23 (1200/ 75, 1200/ 1200, 75, 1200 bps FSK)
- Bell 202 (1200/ 150, 1200/1200, 150, 1200 bps FSK)
- V.21 or Bell 103 (300/ 300 bps FSK)
- High Performance DTMF Modem
- Single/Dual Tones Transmit and Receive
- 'Powersave' Standby Mode
- Asynchronous, Synchronous and HDLC Modes
|
Applications
- EPOS Terminals
- Telephone Telemetry Systems
- Remote Utility Meter Reading
- Security Systems
- Industrial Control Systems
- Electronic Cash Terminals
- Pay-Phones
- Cable TV Set-Top Boxes
Package Styles:
- CMX869BD2 - CMX869BE2
Supply Requirement:
3.0V to 3.6V power supply |
|
Description
The CMX869B is a multi-standard modem for use in EPOS terminals and telephone based information and telemetry systems. This highly integrated single-chip modem IC provides the functions needed to construct a ITU V.32 bis automode modem or a V.22 bis, V.22, V.21 and Bell 202, Bell 103 compatible modem operating under the control of external host timing for EPOS and other proprietary protocols.
The V.32 bis automode-modem provides operation from 14400 bps with automatic fallback through to 4800 bps, retrain, rate re-negotiation and automatic detection of V.22 and V.22 bis modems.
A high-quality DTMF decoder with excellent immunity to falsing on voice and a standard DTMF encoder are included. Alternatively, the device can transmit and detect user-programmed single and dual-tone signals, call progress signals or modem calling and answering tones.
The CMX869B features a software controlled output to drive a hook switch relay and a ring detector block that continues to function when the device is in Powersave mode. When a line voltage reversal or ringing signal is detected, the ring detector circuit provides an interrupt that can wake up the host µController.
Line input and line outputs can be single-ended or differential and the line-output amplifier is capable of directly driving into a low-impedance transformer or opto-isolated DAA. The hybrid and gain control circuits are integrated on chip, requiring only passive external components to build a 2- or 4-wire line interface.
Host control and data transfer is via a simple, high-speed serial bus that operates in normal and Powersave modes and which is compatible with popular µC serial interfaces. An embedded USART accepts multi-format asynchronous data with V.14 support, or allows unformatted synchronous data or HDLC framed data to be received or transmitted. Data transfer can be in either an 8- or 16-bit format.
The CMX869B operates from a single 3.3V supply over a temperature range of -40°C to +85°C and is available in 24-pin TSSOP (E2) and SOIC (D2) packages. | |